Download Print this page

Peerless Pump TUT 4-Stage Repair Instructions

Centrifugal pumps

Advertisement

Quick Links

Read this entire book
Before attempting to install, operate or repair this
pump. Properly installed, your Peerless pump will
give you satisfactory, dependable service. We urge
that
you
carefully
instructions to simplify any problems of installation,
operation or repair.
Failure to read and comply with installation and
operating instructions will void the responsibility
New Equipment manufactured by Seller or Service
supplied by Seller is warranted to be free from
defects in material and workmanship under normal
use and service for a period of one year from date of
shipment. In the case of spare or replacement parts
manufactured by Seller, the warranty period shall be
for a period of twelve months from shipment.
Seller's obligation under this warranty is limited to
repairing or replacing, at its option, any part found to
its satisfaction to be so defective, provided that such
part is, upon request, returned to Seller's factory
from which it was shipped, transportation prepaid.
Parts replaced under warranty shall be warranted
only from date of repair. This warranty does not
cover parts damaged by decomposition from
chemical action or wear caused by abrasive
materials, nor does it cover damage resulting from
misuse,
accident,
neglect
operation, maintenance, installation, modification or
adjustment.
This warranty does not cover parts
repaired outside Seller's factory without prior written
approval. Seller makes no warranty as to starting
equipment, electrical apparatus or other material not
of its manufacture. If Purchaser or others repair,
replace, or adjust Equipment or parts without Seller's
prior written approval, Seller is relieved of any further
obligation to Purchaser under this section with
respect to such Equipment or parts, unless such
repair, replacement, or adjustment was made after
Seller failed to satisfy within a reasonable time
Seller's obligations under this Paragraph.
of the manufacturer and may also result in bodily
injury as well as property damage.
REPAIR INSTRUCTIONS
TYPE TUT 4-, 5-STAGE
CENTRIFUGAL PUMPS
Grease or Oil Lubricated Ball Bearings
read
these
step-by-step
or
from
improper
This book is intended to be a permanent part of your
installation and should be preserved in a convenient
location for ready reference.
should become soiled, obtain a new copy from
Peerless Pump Company.
and/or serial number with your request.
WARRANTY
Seller's liability for breach of these warranties
(or for breach of any other warranties found by a
court of competent jurisdiction to have been
given by Seller) shall be limited to:
(a) accepting return of such Equipment
FCA Plant of Manufacture (CPT under
Incoterms 2000), and
(b) refunding any amount paid thereon
by Purchaser (less depreciation at the
rate of 15% per year if Purchaser has
used Equipment for more than thirty [30]
days), and canceling any balance still
owing on the Equipment.
(c) in the case of Service, at Seller's
option, redoing the Service, or refunding
the purchase order amount of the Service
or portion thereof upon which such
liability is based.
These warranties are expressly in lieu of any
other warranties, express or implied, and Seller
specifically disclaims any implied warranty of
merchantability
purpose, and in lieu of any other obligation or
liability on the part of the Seller whether a claim
is based upon negligence, breach of warranty, or
any other theory or cause of action. In no event
shall Seller be liable for any consequential,
incidental, indirect, special or punitive damages
of any kind.
If these instructions
Include pump model
or
fitness
for
a
particular
2883819
Rev.10-04

Advertisement

loading

Summary of Contents for Peerless Pump TUT 4-Stage

  • Page 1 Grease or Oil Lubricated Ball Bearings Read this entire book Before attempting to install, operate or repair this pump. Properly installed, your Peerless pump will This book is intended to be a permanent part of your give you satisfactory, dependable service. We urge...
  • Page 2: Section 1 Disassembly

    WARNING Do not operate this pump at any pressure, flow rate or without the consent of Peerless Pump Company or its liquid temperature other than those for which the pump authorized representatives. Disregard of this warning can was originally purchased. Do not pump any other liquid result in pump failure and serious personal injury or death.
  • Page 3 FIGURE 1 - 4 STAGE GREASE LUBRICATED BEARINGS 2874544 Rev. 1-85 Parts List Item Description Item Description Lower Casing Outboard Bearing Housing Upper Casing Bearing Cover Right Hand Impeller Water Deflector Left Hand Impeller Bearing Cap Shaft Coupling Key Right Hand Casing Ring Inter stage Sleeve Left Hand Casing Ring Inter stage Sleeve A...
  • Page 4 FIGURE 1A - TUT 4 STAGE OIL LUBRICATED BEARINGS 4858506 Parts List Item No. Description Item No. Description Lower Casing Bearing Cover Upper Casing Water Deflector Right Hand Impeller Bearing Cap Left Hand Impeller Coupling Key Shaft Inter stage Sleeve Right Hand Casing Ring Inter stage Sleeve A Left Hand Casing Ring...
  • Page 5 FIGURE 2 - 5 STAGE GREASE LUBRICATED BEARINGS 2874543 Rev. 1-85 Parts List Item Description Item Description Lower Casing Outboard Bearing Housing Upper Casing Bearing Cover Right Hand Impeller Water Deflector Left Hand Impeller Bearing Cap Shaft Coupling Key Right Hand Casing Ring Base Left Hand Casing Ring Balancing Disc...
  • Page 6 FIGURE 2A – TUT 5 STAGE OIL LUBRICATED BEARINGS 4848507 Parts List Item Description Item Description Lower Casing Outboard Bearing Housing Upper Casing Bearing Cover Right Hand Impeller Water Deflector Left Hand Impeller Bearing Cap Shaft Coupling Key Right Hand Casing Ring Base Left Hand Casing Ring Balancing Disc...
  • Page 7: Bearing Removal

    USING AN ARBOR PRESS PLACE THE BEARING ON TWO FLAT BLOCKS SO THAT THEY CONTACT THE INNER RING OR BOTH RINGS OF THE BEARING. HOLD SHAFT STRAIGHT – FORCE THE SHAFT BY A STEADY PRESSURE, UNTIL THE BEARING IS SEATED AGAINST THE SHAFT SHOULDER.
  • Page 8: Section Ii Inspection And Repair

    1-5. CLEANING BEARINGS d. Place bearing on a screened surface. a. Remove bearings from the housings, referring to dis- e. Using a spray gun with air filter and clean Stoddard assembly instructions. solvent, flush each bearing until all grease and sludge b.
  • Page 9: Section Iii Reassembly

    SECTION III REASSEMBLY 3-1. ROTATING ELEMENT. (See Figure 7 or 8). Re- i. Install O-rings shaft sleeves (14), coat ring and shaft assemble as follows: with oil and screw sleeves on shaft against impeller a. Coat shaft (6) with oil. Re-oil as necessary while hubs.
  • Page 10 Peerless Pump Company representative. 3-4. Follow instructions in Bulletin No. 2880549 to check out the pump after repair and place the pump in service.
  • Page 11 Table II TABLE III GREASING FREQUENCY TORQUE VALUE CHART (See Table IV for amounts) TORQUE VALUT (FT.-LB) SERVICE GREASE EACH MEDIUM CARBON Normal, 8-hour day operation, SIZE STEEL. SAE 5 Room free of dust and damage- 6 Months INCH 105-120,000 PSI ing atmosphere.
  • Page 12 NOTICE: Materials of construction, specifications, dimensions, design features, and application information, where shown in this bulletin, are subject and/or modification without notice by Peerless Pump Company at their option. Peerless Pump Company P.O. Box 7026 – Indianapolis, IN 46207-7026 Phone: (317) 925-9661- Fax: (317) 924-7388 Bulletin No.

This manual is also suitable for:

Tut 5-stage