Advertisement
Quick Links
Advertisement
Related Manuals for J Collection W1830
Summary of Contents for J Collection W1830
- Page 1 INSTALLATION GUIDE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. SAFETY AND LIABILITY ................................. 3 2. TOOLS AND SUPPLIES ................................. 4 3. INSTALLATION PROCESS ..............................4 3.1 Getting started ..............................4 3.2 Fillers ..................................9 3.3 General install information ........................11 3.4 Appliances ................................11... -
Page 3: Safety And Liability
However you may have the skill set to complete the installation on your own. J Collection has no control over the installation, so you are responsible and liable for completing the install correctly and safely. -
Page 4: Tools And Supplies
• Carpenter glue. 3. INSTALLATION PROCESS UNDERSTANDING OUR CABINET CODES - EXAMPLES CODE DESCRIPTION W1830 Wall cabinet 18” wide and 30” high WA2440 Wall angle corner cabinet 24” wide and 40” high Base cabinet, 30” wide and 34 1/2” high T302484.5... - Page 5 84 ½” tall cabinet with 30” wall cabinet All Dimensions From Finish Floor We realize that not all floors are perfectly level. All J Collection base and tall cabinets come with adjustable legs to level your cabinets to make this installation simple and efficient.
- Page 6 1) Verify that walls are square and level. Walls that are out of square or level will make installation of cabinets more difficult. You can use the 3, 4, 5 method to check your corner. 2) Check the floor for level and make note of where the highest points are before installing cabinets.
- Page 7 5) Starting with the corner wall cabinet, install 4, 2 1/2" cabinet screws through the fastening strips on the cabinet into the wall studs. Be sure to check for level before fastening the cabinet into place. If you do not have a corner, start with the end closest to a wall, making sure to leave room for the required filler as per your...
- Page 8 8) Start with the corner cabinet. Make sure the cabinet is level, then install 2 cabinet screws through the top-fastening strip into the wall studs. If you do not have a corner, start with the cabinet closest to the wall, making sure to leave the correct space for the required filler.
-
Page 9: Fillers
FILLER STRIP INSTALLATION If a filler strip is required, measure the distance between the cabinet and the wall and cut the filler strip to match. 3.2 FILLERS Fillers are needed to take up odd dimensions when cabinets are installed next to a wall. They will also allow clearances for doors and drawers to operate properly when turning a corner with a blind corner cabinet. - Page 10 BBC (base blind corner) cabinets may be pulled out from the corner if required and the room is available. When installing a base cabinet at a right angle to a BBC cabinet you must use a filler to provide clearance for door and drawer handles. The filler width required is usually 1 3/4” - 3” depending on the type of pull used on the cabinets.
-
Page 11: General Install Information
3.3 General Install Information • The front edge of a fridge gable should be flush with front of the cabinet doors. • Install all cabinets level and plumb. • Install bumpers on all door and drawer fronts, especially corner cabinets. •...