Battery Features; Installation; Parallel Installation - Yakshak Impulse Lithium LiFeP04 Manual And Installation Manual

Battery Features

Impulse Lithium Batteries come standard with a Battery Management System or (BMS).
A BMS is an onboard computer that continuously monitors the parameters of the
battery. Below is a list of standard operating conditions that the BMS will monitor.
When conditions fall outside of normal operating ranges the BMS will protect the battery
and your investment
§ High Voltage
§ Low Voltage
§ High Temperature
§ Low Temperature
§ High Current
§ Continuous Amperage Output
§ Cell Balancing

Installation

Impulse Lithium Batteries are simple to install, simply connect your positive cables to
the positive terminal and your negative cables to the negative terminal. Our batteries
work great in either parallel or series configurations (up to 48v). Our batteries come
standard with 10mm mounting hardware. Positive terminals are marked with (+)(RED)
and Negative terminals are marked with (-)(BLACK)

Parallel Installation

Impulse Lithium recommends up to (4) batteries for parallel connection. In this configuration,
positive leads are connected together and negative leads are connected together. The system
voltage remains (12v) but the currents change by the multiple of batteries. Please make sure all
of your wiring is sized to accommodate the increased current(s) this includes fuses or circuit
breakers. See illustration below