Summary of Contents for Stoane Lighting Frog Type X
Page 1
Frog X Spike.pdf 1 09/03/2021 13:10:29 All of our in-house printed paper is 100% recycled and recyclable Frog Type X Spike Installation and Maintenance Instructions IMPORTANT: All wiring connections must be made before switching on mains power. Xicato LED Module Class III - Extra Low Voltage IP66 Dust tight and protected against powerful jets of water.
Page 2
Contact SL for support if required. Fully isolate the fitting and allow to cool. All Stoane Lighting products are covered by a five year Clean the fitting with a slightly damp lint free cloth Warranty and a 25 year Duty of Care. Products are from a mild solution of soap and water.
Page 3
Frog X Spike.pdf 3 09/03/2021 13:10:29 MODULE AND ACCESSORIES The fitting uses a Xicato LED module. The colour temperature and lumen output can be found on the product label on the fitting. Tilt lock To Add/Remove accessories: Pan lock Isolate the fitting from the supply and allow to cool. Step 1 Remove the bezel from the lamp tube by unscrewing in an anti-clockwise direction.
Page 4
If removal is unavoidable, please see the disassembly note below. All Stoane Lighting products are supplied with a 5 year warranty and a 25 year duty of care.
Need help?
Do you have a question about the Frog Type X and is the answer not in the manual?
Questions and answers