1. Brake hose
2. Master cylinder
3. Engine stop switch lead
4. Engine stop switch
5. Throttle cable
6. Clutch cable
7. Clamp
8. Cable guide
A. Install the brake hose so that its pipe portion
directs as shown and lightly touches the pro-
jection on the master cylinder.
B. Pass the engine stop switch lead in the mid-
dle of the clutch holder.
C. Pass the throttle cable above the number
plate.
D. Pass the clutch cable behind the number
plate.
E. Clamp the engine stop switch lead to the
handlebar.
F. Pass the brake hose in front of the number
plate and through the cable guide.
G. Pass the clutch cable through the cable guide
on the number plate.
CABLE ROUTING DIAGRAM
2-20