OUTDOOR SAND PIT WITH LID
(CS0720)
Assembly Instructions
Please read these instructions carefully before assembling the unit and where necessary
refer to the enclosed component list.
Adults Required For Assembly
Maintenance
Some residual dust from the manufacturing process may be apparent.
This will wipe off with a damp cloth.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to overtighten the fasteners.
Weathering Effects.
Like all natural timbers when subjected to the elements, under certain
conditions, some surfaces may be susceptible to staining, moulds &
mosses. Though unsightly these conditions will not cause degradation
of the material. Should staining occur it is suggested that the surface
be cleaned with a mild detergent.
Fading may occur if left in direct sunlight for prolonged periods of time.
An Adult Should ALWAYS SUPERVISE PLAY!
This unit is designed for use on a flat level surface.
Please retain our address for future reference
2540
Manufactured by:
Mike Miller Associates Ltd,
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774 / 45300
Fax: 016973 45511
Email: info@twoey.co.uk
Website: www.twoeytoys.com
Registered in England No: 1425839
Registered Office: The Old Brewery, Caldbeck,
Cumbria CA7 8EW
Need help?
Do you have a question about the Outdoor Sand Pit with Lid 2540 and is the answer not in the manual?
Questions and answers