Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Jay's Audio Manuals
  4. CD Player
  5. CDT2-MK2
  6. User manual

Jay's Audio CDT2-MK2 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
JAY'S AUDIO
CDT2-MK2
USER MANUAL
WWW.JAYS-AUDIO.COM
Page 1 of 10

Advertisement

loading
Need help?

Need help?

Do you have a question about the CDT2-MK2 and is the answer not in the manual?

Questions and answers

Related Manuals for Jay's Audio CDT2-MK2

Summary of Contents for Jay's Audio CDT2-MK2

  • Page 1 JAY’S AUDIO CDT2-MK2 USER MANUAL WWW.JAYS-AUDIO.COM Page 1 of 10...
  • Page 2 QUICK START GUIDE 1. After receiving the CDT, please do not rush to power it up. First, check the physical appearance of any damage may be caused by shipping. 2. Slide the top loading lid open and remove the protection foams completely. 3.

  • Page 3: Package Contents

    2. Disc Clamp 3. Gloves 4. Remote Control Unit 5. Spare Fuse 6. CDT2-MK2 UNPACKING The CDT is shipped with sturdy double boxes. Please keep the box should you need to transport the unit to another location. Carefully unpackage the CDT, place it on a stable surface, i.e. HiFi Rack. You may wish to use the gloves provided while handling the CDT.
  • Page 4 Frequent fuse blown is considered a fault. Please contact us to investigate the issue further. Connect the power cord to the AC Mains IEC inlet firmly. (3) DIGITAL OUTPUT 16/44.1K The CDT2-MK2 is equipped with four (4) Digital Output. From the Left to the Right:  HDMI I2S (LVDS)  ASE/EBU ...
  • Page 5 The Digital Outputs are isolated. You may connect more than one output to the external DACs. Should you need to run a long interconnect cable, we recommend ASE/EBU connection. HDMI I2S (LVDS) Figure 2. HDMI I2S Pinout There is no industry standard of I2S connection. We could not guarantee the I2S connection workability with your DAC.

  • Page 6: Operation

    Figure 3. CDT2-MK2 Top Loading  Disc Loading To open the CDT2-MK2 top loading door, slide the lid towards the rear of the unit fully. The CDM4 assembly shall be visible, and the Disc Clamp shall be accessible. Lift the Disc Clamp gently by holding the centre part of the Disc Clamp. Place a disc to the centre of the disc holder.
  • Page 7  Playback Turn on the rear power switch. After about 5 seconds of spinning the disc, the CDT automatically enters power-on state, and the OLED display flashes “READ” indicating that the disk information is being read. After the disc information is correctly retrieved, the disc information’s will be displayed. For example, "18 84:18".

  • Page 8: Remote Control Unit

    REMOTE CONTROL UNIT The CDT2-MK2 comes with a milled solid aluminium Remote Control Unit. It is a generic Remote Control equipped for all CDT/CDP products; hence, it is not all the buttons are functional with the CDT2-MK2.  Power  No function ...
  • Page 9  CRYSTEK FEMTO Clock  HDMI I2S LVDS Output  Scientific Digital Output Isolation Transformer  Full CNC Milled Aluminium Chassis Figure 5. Internal of CDT2-MK2 * Premium components available exclusively at flagship store only WWW.JAYS-AUDIO.COM Page 9 of 10...
  • Page 10 SPECIFICAITON  Digital Output o Output Sampling Rate 16 Bit / 44.1KHz o COAX (RCA/BNC) 2Vrms, 75ohm o AES/EBU 5Vrms, 110ohm o HDMI I2S LVDS  AC Power: 110V/230V  Power Consumption: 20W  Dimension: 430mm x 380mm x 120mm ...