Related Manuals for ARCHIPELAGO LIGHTING iUVC1
Summary of Contents for ARCHIPELAGO LIGHTING iUVC1
- Page 1 INSTRUCTION GUIDE iUVC1 | UVC Smart Lamp Please carefully read this instruction guide before using the product...
- Page 2 Thank you for choosing the ARCHIPELAGO iUVC1 UVC Smart Lamp. Before using iUVC1, please read the instruction carefully in order to use this product in a safe and sound manner. If you have further questions and should problems persist, please email our after-sale service: iuvc1@archipelagolighting.com...
- Page 3 2. Product Specification Product Name iUVC1 UVC Smart Lamp Model iUVC1 Input 100-240Vac | ~50/60Hz Wattage Germicidal Factor Wavelength 254nm Size 18.5 x 7.7 x 7.7 inches WiFi WiFi 802.11B/G/N 2.4GHz Mobile App OS Android 4.4 / iphoneOS 9.0 and above...
- Page 4 3. Turning ON the Device 1. Manual Mode: Short press function button for fast, full, and custom time modes. The indicator of the corresponding mode flashes slowly during the switching process. After 10 seconds, UVC Smart Lamp starts, and the corresponding mode indicator will always be on.
- Page 5 5. Wireless Settings 1. Connect to WiFi router. Must be 2.4GHz band — this device will not connect to 5.0GHz network. 2. After the device is powered on, press and hold the switch button for 5 seconds to enter the network distribution mode, you can choose "Add Manually and "Auto-Scan"...
- Page 6 6. Key Light Indicator 1. After the device is powered on, the button indicator light is blue, and if connected to WIFI, it will turn to green. 2. Short press to switch between fast, fulI, and custom time modes. The indicator of the corresponding mode flashes slowly during the switching process.
- Page 7 7. Power Failure Acknowledgements Status Fault Description UVC bulb is not ON Operation Fault Operation is terminated Buttons cannot be controlled The network connection is normal, but the APP cannot WiFi Connection Fault control the device...
- Page 8 8. Safety Precautions 1. Please do not touch the lamp when working, to avoid being burnt by the lamp. 2. During the process, humans, animals and plants should not be in the premises. 3. NOTE: UVC Smart Lamp works similar to the sun in that prolonged exposure can fade colors, including paintings and hardwood floors.
- Page 9 9. Limited Liability Warranty 1. “12 Month Limited Liability Warranty” – See https://archipelagolighting.com/support/warranty-statement/ for full details. 2. During the applicable Warranty Period set forth above relating to any Product, Seller warrants that the Products will be free from defects in material and workmanship (the “Limited Warranty”). This Limited Warranty extends only to the end- ‐user of the Products (the “Buyer”).
- Page 10 10. Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 11 This device complies with Part 18 of the FCC Rules. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. This equipment has been tested and found to comply with Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the iUVC1 and is the answer not in the manual?
Questions and answers