Table of Contents
Advertisement
REAR SUSPENSION
Control rod
1. Adjust:
• Control rod stroke
Adjustment steps:
• Loosen the locknut
• Turn the control rod adjuster
or
to adjust the control rod stroke.
Adjusting
MIN
position
Decrease
Effect
Pitching
RS90RX/RS90GTX/RS90GTAX:
Second mark to the left of MAX
Standard
RS90LTX/RS90LTGTX:
Fourth mark to the left of MAX
• Check the adjuster length
scale on the special wrench
the owner's tool kit as shown. Make sure
that the rim
within the range
• While holding the adjuster securely, tighten
the locknut.
Locknut:
35 Nm (3.5 m•kg, 25 ft•lb)
CAUTION:
When using the special wrench, make sure
that it is situated at a right angle to the con-
trol rod, and that it is tightly fitted to the
locknut or the control rod adjuster.
WARNING
Never adjust the control rod beyond the
range of the scale on the special wrench.
29
INSP
ADJ
.
in direction
STD
MAX
Increase
←
→
weight
transfer
using the
included in
of the control rod body is
of the scale.
Advertisement
Table of Contents
