Installation and User's Guide
614 Ridgeway, Rose Hill, Kansas 67133 USA
We hope that your new CellSet gives you many hours of clear and comfortable operation.
This CellSet was designed to connect to a variety of multifunction GPS/MP3/Cellphone Devices, and bike
intercoms and auxiliary audio input systems. It allows the user to switch the GPS' device audio to either the bike's
intercom or auxiliary audio system.
This CellSet must be used in conjunction with:
• KTG Type 2 Intercom Harness
• KTG Device Harness
• KTG Aux Audio Harness or KTG Audio Switcher (e.g. AuxSwitchSet, SingleAuxADSet, etc.)
• KTG Power Harness
• Simple Switch Assembly or Timer Switch Assembly.
Each of these KTG harnesses and assemblies are sold and packaged separately.
Connect CellSet male plug P1 to the Power Harness you purchased.
Connect CellSet female jacks J1, J4 and J3 to the Device Harness you purchased.
Connect CellSet's jack J5 to the Intercom Harness you purchased.
Connect CellSet's jack J2 to the Simple Switch or Timer Switch Assembly you purchased.
Finally, connect CellSet's plug P2 to either the Aux Audio Harness you purchased or the Kennedy Audio Switcher
assembly's mating connector.
Refer to the instructions sheets provided with the Harness and Switch assemblies: Complete those installations.
CellSet MC/GPS2
Document part number 65322R0
Kennedy Technology Group, Inc.
voice 316.776.1111
fax 316.776.9035
email:kennedy@cellset.com
www.cellset.com
Thank you for purchasing our product!
INSTALLATION