Page 1
USER MANUAL USER MANUAL 120W 12V SOLAR MAT WITH 10A 12V SOLAR CHARGE CONTROLLER Model No. KT70727 IMPORTANT This manual contains important safety and operational instructions. Please read carefully before using this product.
Page 2
USER MANUAL For your personal safety, please read, understand and follow the information provided in this instruction manual. Congratulations on your new & Innovative 120 Watt 12 Volt Portable Folding Solar Mat Folding down to a convenient 395mm x 360mm x 80mm ideal for camping & marine applications, 4x4, caravan applications &...
Page 3
USER MANUAL Components 6 Panel solar mat 10A 12V solar charge controller, 220mm leads with 50A heavy duty connectors Heavy duty connector to positive negative battery clamps, 550mm lead 50A 12V heavy duty connector extension lead, 4.8M Solar mat when folded Solar Mat Operational Instructions Step 1 - Unfold &...
Page 4
USER MANUAL Solar Mat Specifications TYPE Monocrystalline Maximum Power (Pmax) 120Wp Maximum Power Voltage (Vmp) 19.6V Maximum Power Current (Imp) 6.12A Open Circuit Voltage (Voc) 23.2V Short Circuit Current (Isc) 6.76A Battery Connections Battery Clamps Product Application Class A Product Weight 5.1Kg Product Dimensions Folded 395mmL x 360mmW x 80mmD...
Page 5
USER MANUAL Solar Controller Specifications Type PWM (Pulse Width Modulation) Model SR-HP2410 Rated Current System Voltage Automatic Recognition of 12V Dimensions 130 x 75 x 38mm No-Load Loss <5mA/12V Max. Solar Energy Input <55V Max Voltage at the Battery end <35V Over Voltage Protection 17.0V...
Page 6
USER MANUAL Solar Controller Diagram LCD DISPLAY MOUNTING POINTS External Dimensions: 103mm 71mm x 36mm LOAD BATTERY Mounting Point Hole Dimensions: 3.5mm Dia SOLAR MAT Solar Controller Operation Step 1: Connect the battery. If the connection is correct, the controller screen lights up; otherwise, check whether the connection is correct.
USER MANUAL Display Features LCD Icon Indicated Object State Battery Steady on Load Discharge Steady on LOAD Data daytime or Steady on charging Night recognition Quick flashing Load short circuit Steady on or overload Load Switched on Steady on Load Switched off Steady off Normal battery All on Over discharge...
Page 8
USER MANUAL To set Menu on LCD Display of Solar Controller 1. Long hold the red KEY in any mode to enter the load mode setting interface, and load mode begins to flash. 2. Short press the key to adjust the load mode 3.
USER MANUAL LED Display Mode Pure light control mode 01-14 Light control + time control (1 to 14 hours) Manual mode (default) Debugging mode Normal on mode Manually Switching On / Off Modes When the load mode is set to 15 (manual mode), short press the key (non-setting mode) in any interface to switch on or off the load.
Be sure to use components (cables, fuses, etc) greater than 25% of the Solar mat's maximum current ratings. When storing the KT Solar mat - to avoid damage, do not pack heavy items on top. Do not disassemble the controller. Take to a qualified electrician if the unit requires repairing.
If the panel is shaded or if it is a very hot day the output will decrease further. Will it charge my flat battery and how long will it take? Yes, the KT solar mat will charge a flat battery (above 9v) 250-1800cca (automotive) with a charge depending on battery size.
Warranty Guarantee This product carries an unconditional 12 Month Warranty against defects under the terms of the manufacturers warranty. Should the manufacturers warranty not comply with Australian Consumer Law, AECAA Pty Ltd Trading as Automotive Electrical & 4WD Accessories will provide a warranty against defects for 12 months from date of purchase on the following terms: a ) For valid claims, Automotive Electrical &...
Need help?
Do you have a question about the KT70727 and is the answer not in the manual?
Questions and answers