Huawei CR52K-10GE Specifications page 2

Quidway netengine 5000e core router 10ge optical interface boards

Quidway® NetEngine 5000E Core Router 10GE Optical Interface Boards

Currently, the NE5000E provides two types of 10GE optical interface boards: 1-port and 2-port. The

first type uses pluggable XFP optical modules, and the latter type uses fixed optical modules.

Before networking, you must first choose between 10G LAN board and 10G WAN board based on

their differences, then choose between 1-port and 2-port 10GE optical interface boards based on

network requirements, and finally choose between pluggable XFP optical modules and fixed optical

modules for the 10G optical interface board based on transmission distance requirements.

Specifications

Currently, the NE5000E supports three types of 10G LAN boards and three types of 10G WAN

boards. Among them, two use pluggable XFP optical modules (2-port), and the other four use fixed

optical modules (1-port). The specifications are listed below:

Module name

CR52K-2x10GE-LAN-XFP

CR52K-10GE-LAN-10KM

CR52K-10GE-LAN-40KM

CR52K-2x10GE-WAN-XFP

CR52K-10GE-WAN-10KM

CR52K-10GE-WAN-40KM

http://www.huawei.com/products/datacomm/

Interface type

2-port 10G LAN Ethernet optical interface

board: Different XFP optical modules can be

chosen for different transmission distances.

1-port 10G LAN Ethernet optical interface

board: The center wavelength is 1310 nm, and

the maximum transmission distance is 10 km.

1-port 10G LAN Ethernet optical interface

board: The center wavelength is 1550 nm, and

the maximum transmission distance is 40 km.

2-port 10G WAN Ethernet optical interface