Button Operations - ToSee Defender User Manual

Wi-Fi indicator Status
Name Performance
Flashing rapidly in red
Flashing slowly in red
Wi-Fi Flashing in green
indicator
Flashing in blue
Solid in green

Button operations

1) Reset the device
If the Wi-Fi indicator doesn't flash in red, press and hold the reset button for 3 seconds, it will flash in
red, it means it was reset successfully.
Reset operation will clear the Wi-Fi configuration and door sensor pairing.
2) Switch Wi-Fi configuration mode
If the Wi-Fi indicator flashes in red, press and hold the reset button for 3 seconds, it switches the Wi-
Fi configuration mode and the Wi-Fi indicator flashes rapidly or slowly according to different mode.
Status
Wi-Fi is not configured, Smart Mode.
Wi-Fi is not configured, AP Mode.
Wi-Fi configured, Not connect to network; Please check the
router's firewall or the Wi-Fi ssid and Wi-Fi password.
Door Sensor is not paired with Controller, please open or
close the door or flip the door sensor for 90 degrees to pair.
Wi-Fi configured, Working Mode.
5