Page 1
Thank you for your purchase of this radio controlled alarm clock. Please read these instructions carefully and keep the manual for future reference. INSTALLATION 1. Place your clock face down on a flat and soft surface. 2. Remove the battery cover at the back of the clock. 3.
Page 2
TO SET THE TIME, 12/24 AND CALENDAR Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to normal time display mode. 1. Press and hold the “SET” button on the top of the clock for 4 seconds until 12Hr flashes on the display. Use the buttons on the top of the clock to select 12Hr or 24Hr.
Page 3
3. Press the “ALM ON.OFF” button on the top of the clock once again to activate both Alarm 1 and Alarm will appear to indicate both Alarm 1 and Alarm 2 is activated. 4. Press the “ALM ON.OFF” button on the top of the clock once again to deactivate both Alarm 1 and Alarm 2.
Need help?
Do you have a question about the 2389042 and is the answer not in the manual?
Questions and answers