London Clock 2552271 Quick Start Manual

Thank you for your purchase of this alarm clock. Please read these instructions carefully and keep the manual
for future reference.

INSTALLATION

1. Place your clock face down on a flat and soft surface.
2. Remove the battery cover at the back of the clock.
3. Insert 2 x new AA batteries into the battery compartment by observing the "+" and "-" polarity.
4. Replace the battery cover.

FUNCTIONS

Time Set Knob
Alarm On/Off Switch
Battery Compartment

TO SET THE TIME

1. Turn the "Time Set Knob" on the back of the clock in an anti-clockwise direction to the correct time.

TO SET THE ALARM

1. Turn the "Alarm Set Knob" on the back of the clock in an anti-clockwise direction to the desired alarm
time.

TO TURN THE ALARM ON AND OFF

1. To activate the alarm, move the "Alarm On/Off Switch" to the ON position.
2. When the alarm sounds, move the "Alarm On/Off Switch" to the OFF position to deactivate the alarm.
Please note that when the "Alarm On/Off Switch" is in the ON position, the alarm will sound at both AM and PM
times.

TO ACTIVATE THE LIGHT FUNCTION

1. To activate the light function, press the "Light" button on the right hand side of the back of the clock.
Please note that the light will only remain on while the "Light" button is being pressed.

Care instructions

 Wipe clock with a soft dry cloth only.
 Replace batteries every 12 months or when the stock stops.
Battery safety & disposal
Alarm Set Knob
Light Button