Advertisement
Table of Contents
- 1 Assembly Instructions for Corio Mk2 Chair
- 2 STEP 1: Unpack the Boxes.
- 3 STEP 2: Place the Padded Seat Upside Down.
- 4 STEP 3: Place the Chair Onto the Seat Pad.
- 5 STEP 4: Place the Washers over each Bolt.
- 6 STEP 5: Hand Tighten the Long Bolts.
- 7 STEP 6: Fasten the Short Bolts.
- 8 STEP 7: Tighten the Front Bolts.
- Download this manual
Advertisement
Table of Contents
Related Manuals for Furnlink CORIO MK2
Summary of Contents for Furnlink CORIO MK2
- Page 1 ASSEMBLY INSTRUCTIONS FOR CORIO MK2 CHAIR...
- Page 2 ASSEMBLY INSTRUCTIONS FOR CORIO MK2 CHAIR STEP 1. Unpack the boxes. Each box should contain: 4 x Chairs (with no seat attached) 4 x Padded Seats 2 x Long Bolts 2 x Short Bolts 4 x Washers 1 x Allen Key STEP 2.
- Page 3 STEP 5. Hand tighten the Long Bolts into the front of the chair, as shown. Do not tighten with Allen Key or Electric drill yet. Front of Chair Long Bolt Washer STEP 6. Fasten the Short Bolts into the back of the chair, using the Allen Key provided or an Electric Drill with a Hex Drill Bit.
Need help?
Do you have a question about the CORIO MK2 and is the answer not in the manual?
Questions and answers