Table of Contents
Advertisement
Installation of Cabinet
After placing the drying cabinet in location, securing and mounting drying cabinet to the wall is op-
tional. There are two mounting holes located at the top rear of the cabinet.
Failure to do this may allow inadvertent tipping of the dryer.
The drying cabinet is designed to not require outside venting unless installed in an enclosed space.
To attach a vent, bend the 8 tabs located on the top of the cabinet up 90° to allow attaching 4" metal
exhaust vent. Secure the exhaust vent to the metal tabs through the 4 holes provided in the tabs.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check "Troubleshooting." It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete model and serial number of your appliance. This infor-
mation will help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you only use factory replacement parts. Factory replace-
ment parts will fit right and work right because they are made with the same precision used to build every new Ready
Rack appliance.
To order factory replacement parts, call our Customer Service Center at
Call the Ready Rack Inc. Customer Service Center at 1.800.991.2120
Our consultants provide assistance with:
Features and specifications on our full line of appliances Installation information.
Use and maintenance procedures.
Accessory and repair parts sales.
For further assistance
If you need further assistance, you can write to Staber Industries with any questions or con-cerns at:
Ready Rack 818 Trakk Ln, Inc., Customer Support, Woodstock, IL 60098
Installation of Exhaust
In the U.S.A.
Please include a daytime phone number in your correspondence
1.800.991.2120
.
9
Advertisement
Table of Contents
