Related Manuals for SG Wireless SGW6008
Summary of Contents for SG Wireless SGW6008
- Page 1 SGW6008 BLE-WiFi Gateway User Manual September 2020 V1.2 SG Wireless™ Confidential...
-
Page 2: Table Of Contents
USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual Contents 1. Introduction 2. SGW6008 BLE-WiFi Gateway a. Exterior b. Specifications 3. Provisioning Procedures a. AP Mode Configuration b. WiFi Network Configuration for SGW IoT Platform c. Gateway Provisioning 4. Edge Device Provisioning 5. Certification 6. -
Page 3: Introduction
Figure 1: Data Collection and Transmission through SGW6008 Gateway As the connected solution for the SGW111X BLE Module and SGW8130 BLE Sensor Tag, the SGW6008 Gateway enables real-time remote monitoring or asset tracking for IoT applications, hassle-free. IoT applications include but are not limited to: •... -
Page 4: Sgw6008 Ble-Wifi Gateway
USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual 2. SGW6008 BLE-WiFi Gateway a. Exterior (Figure 2) Power LED BT LED 1. Micro-USB power input (5.0V DC, 1A) WiFi LED 2. AP mode button for network configuration with WiFi and Gateway provisioning 3. 3 LED status indicators (Table 1) -
Page 5: Provisioning Procedures
SGW6008 BLE-WiFi Gateway a. AP Mode Configuration 1. Put the SGW6008 Gateway in AP Mode by connecting it to the power source with the micro-USB cable. 2. Use the PC or mobile device to connect to the Gateway’s WiFi network:... -
Page 6: Wifi Network Configuration For Sgw Iot Platform
USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual b. WiFi Network Configuration for SGW IoT Platform There are two ways to configure the WiFi network for the Gateway: 1. Input your preferred WiFi network manually (Figure 2). Enter the network name and password (if ap- plicable), and click ‘Save WiFi Setting’... -
Page 7: Gateway Provisioning
USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual c. Gateway Provisioning The Gateway has to be linked to a SGW IoT Platform account for data access. 1. Enter your SGW IoT Platform username (email address) and password, and label your Gateway with a name, location and description (Figure 4). -
Page 8: Edge Device Provisioning
SGW6008 BLE-WiFi Gateway User Manual 4. Edge Device Provisioning The edge device needs to undergo a provisioning process to connect to the SGW6008 Gateway. 1. If you are not already logged in, use a browser to access the SGW IoT Platform at https://www.sg-iot.com. -
Page 9: Certification
5. Certification a. CE Statement Regulatory Conformance (RED) Hereby, (SG Wireless Limited) declares that the radio equipment type (SGW6008) is in compliance with Di- rective 2014/53/EU. The full text of the EU declaration of conformity is available at the following website: https://www.sgwireless.com. - Page 10 USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual d. RF Exposure Information and Statement This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
-
Page 11: Revision History
SG Wireless does not convey any license under its patent rights nor the rights of others. SG Wireless products may not be used in life critical equipment, systems or applications where failure of such equipment, system or application would cause bodily injury or death. - Page 12 USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual © 2020 SG Wireless Limited. All rights reserved. SG Wireless™ Confidential...
Need help?
Do you have a question about the SGW6008 and is the answer not in the manual?
Questions and answers