How To Connect The Cosmic Byte Controller To Your Ps3?; How To Connect The Cosmic Byte Controller To Android System?; Warnings And Warranty - Cosmic Byte C3070W Manual

HOW TO CONNECT THE COSMIC BYTE CONTROLLER TO YOUR PS3?

1.Plug the USB Nano receiver to your PlayStation 3
2.Turn on your controller by setting the switch to [ON] and press [START]
3.The 4 LED indicators flash
4.Your controller is connected to your PS3 when the First LED remains on

HOW TO CONNECT THE COSMIC BYTE CONTROLLER TO ANDROID SYSTEM?

Some devices work with the Android operating system such as Smart Phone, Tablet, Smart TV, TV
Box...So you can connect your Cosmic Byte controller:
1.Plug the USB Nano receiver to your Android device
Warning: Smart Phone/Android Tablet must support OTG function and be equipped with an OTG
converter.
When your controller is used for Smart Phone/Android Tablet, pls plug the OTG Converter into the
Phone/Tablet, and then plug Nano USB Receiver into the OTG Convert (Micro USB Head).
2.Turn on your controller by setting the switch to [ON] and press [START]
3.The 4 LED indicators flash
4.Your controller is connected to your Android Device when the First LED remains on

WARNINGS AND WARRANTY:

WARNINGS:
Warning and Safety Instructions:
Do not attempts to repair: Do not attempt to disassemble, open, repair or after the products, its
accessories, or the power cable. You could electrocute yourself to other hazards. Any signs of
attempts to open and/or after this device, including removing or tearing a sticker, will void the
warranty.
Not use near liquid: To reduce any risks of fire or electric shock, do not use this device near liquid
and do not expose it to rain or moisture. Do not attempt to dry the device with a hair-dryer or
microwave over.