blipcare BP800 User Manual page 28

ERROR MESSAGES (continued)
Error message
Warning
"out " shows
message
28
E5 Communication with server failed
E6 Radio communication failure
E7 Device is disabled (inactivated)
EEX A calibration error
occurred.
Out of measurement range
Call Support
Move to a different room to improve
cellular signal strength
Call Support for reactivation
Retake the measurement. If the
problem persists, contact the retailer
or our customer service department
for further assistance.Refer to the
warranty for contact information and
return instructions.
Relax for a moment. Refasten the
cuff and then measure again. If the
problem persists, contact your
physician.