Advertisement
How to select message for Group printing :
page 6
- open Group print and press Add
- select the messages required for Group printing and press Confirm
- the selected message will appear in the display window
- to arrange the message in print sequence, press the Up and Down arrow icon
to select the message to be printed in sequence
- once the print sequence is correct, press Print
- press the print-go trigger once for each message and at the end of the print
sequence, the message will repeat again from the 1st message
3. Tag Management – currently not available, will update in near future.
System Parameters Setting
Go to Home page to select Setting
and the window will appear
1. Print – allow adjustment for Resolution, print direction, Mode (Handheld/Sensor),
Delay and Speed
2. Tone – printer function selection
3. Screen – allow screen brightness adjustment
4. Power – touch screen parameter setting
5. Ink – Firing Voltage and Pulse Width adjustment
(very important to set the correct firing voltage value or the ink cartridge
may be damage due to wrong voltage)
Advertisement
