Advertisement
Congrats on purchasing your Z-Flash! Your Z-Flash is ready to start flashing your
factory lights right out of the box. Follow the steps below to get started:
1. If your vehicle is listed on the chart below, it means you need to install the included security bypass
module or t-harness. This should be installed before you install your Z-Flash. Check the respective page
for installation instructions. Once complete, proceed to step 2. If your vehicle is not listed, proceed to
step 2.
2. Plug the switch or hardwire into the 2x2 port on the side of your Z-Flash module. Then plug the Z-Flash
into the OBD-II port. See page 2 for further instructions.
3. Test out your module! If you want to change or edit any of the patterns, use the provided USB cable
and plug your Z-Flash into your Windows computer. Visit TheZFlash.com for full instructions and video
tutorials on how to edit or create your own patterns.
These vehicles require an additional security bypass module:
2018-2020
2018-2020
2019-2020
2018-2020
2018-2020
2018-2020
2020
2018
2019-2020
2018-2020
2018-2020
Warranty:
This warranty protects the product(s) specified to be free
from defects in material and workmanship for 1 (one) year.
During the warranty period we will, at our sole discretion,
repair or replace the product(s). This limited warranty does
not cover travel expense or labor charges for the removal and
reinstallation of the product, or any other charges alike. We
are not responsible for incidental damages, including but not
limited to: loss of time, loss of work, inconvenience, loss and/
or damage to personal property, shipping expenses. We are in
no way responsible for any loss or any indirect or consequential
damages resulting from any such defect in material and/
or workmanship whether it's due to negligence, incorrect
installation, or manufacturer mistake. It is the sole responsibility
of the party initiating a warranty claim to pay shipping charges
associated with returning a product.
Jeep Grand Cherokee
Dodge Durango
Ram 1500
Dodge Charger
Jeep Wrangler JL
Chrysler 300
Jeep Gladiator
Ram 1500
Ram 1500 Classic
Ram 2500-5500
Dodge Challenger
Warning:
• If you do not know what you are doing, do not try.
• We advise professional installation for all products.
• Electrical shock can cause injury or death. Please use proper
tools and protection when installing. Professional installation
is strongly advised.
• Please check for correct installation method
before powering on. Electrical fire can occur.
• Do not run any wires in the way of air
bags or other safety devices.
Page 3
Page 3
Page 3
Page 3
Page 3
Page 3
Page 3
Page 4
Page 4
Page 4
Page 5
1
Advertisement
