Page 1
OBD-II SWITCH • FORD USER MANUAL OBD-II Switch Switch Hardwire Version 1.0 *Patent Pending TheZFlash.com...
Page 2
Congrats on purchasing your Z-Flash! Your Z-Flash is ready to start flashing your factory lights right out of the box. Follow the steps below to get started: 1. Plug the switch or hardwire into the 2x2 port on the side of your Z-Flash module and follow the respective instructions below.
Page 3
OBD-II MODULE INSTALLATION 1. Connect the module into the vehicle’s OBD-II port. The OBD-II port is located under the dashboard on the driver’s side. 2. Start your vehicle. 3. The module will begin to boot and the LED will flash for 5 seconds. 4.