Models; Shelves; Storage Drawers; Temperature Controls - Hotpoint HTJ17CBB Owner's Manual And Installation Instructions

About the temperature control dial.
Turning the dial to Off stops cooling in both compartments—fresh food and freezer. It does not shut off power to the refrigerator.
Temperature Control Dial
The temperature dial adjusts refrigerator from warmest to coldest.
See illustrations below for temperature setting information.
Recommened
factory setting
About the fresh food compartment shelves.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
2
1 Tilt up
Lift rear
Pull forward
To remove the full-width shelves
About the freezer compartment shelves.
1
2
3
4
Coldest setting
Half-Width Shelves
One end of the shelf rests on a molded side-
wall support; a bracket on the other end hooks
into a track on the rear cabinet wall.
To remove, lift the shelf up at front, then off
the support and out of the track.
To replace, select desired shelf height. With
shelf front raised slightly, hook the bracket's top
lug into the track, then lower the shelf onto the
support.
Full-Width Shelves
Some models have a steel wire sliding shelf, a
stationary tempered glass shelf,
a spillproof shelf or two steel wire stationary
shelves. These shelves can be moved to
another place in the fresh food
compartment.
The full-width sliding shelf has stop-locks.
When placed correctly on the shelf supports,
the shelf will stop before coming completely
out of the refrigerator and will not tilt when
you place food on it or remove food from it.
Step Shelf
(on some models)
To remove the step shelf:
1 Lift left side of shelf slightly.
2
Move shelf to the left to free its right ends
from holes in the cabinet wall.
To replace the step shelf:
1 With shelf tilted as shown, fit left ends of
shelf into holes in cabinet wall.
Warmest setting
NOTE: The shelf to the right of the track is designed
to hook into the right-hand slot; the shelf to the left
is designed to hook into the left-hand slot.
Lift rear
Pull forward and down
To remove a full-width shelf when
the fresh food compartment door
cannot be opened fully
3
Lower right side of shelf, move shelf to the
right and take it out.
2 Lift left side of shelf slightly, swing shelf up,
fit right ends of shelf into holes in cabinet
wall, and lower shelf into place.