Page 1
Kaabo Mantis Electric Scooter User Manual Read this manual carefully BEFORE operating your scooter!
Page 2
Congratulations on your new Mantis electric scooter! And thank you for purchasing it at urban360.es or at one of our retail partners. Follow us on Instagram and tag us to be featured on our page! @urban360es...
BEFORE YOU START It is important to read through, understand, and adhere to all instructions and safety warnings before charging and operating this scooter. Upon receiving and opening your box, please inspect the contents for signs of damage or loose screws from transport. If something doesn’t feel right, please take a few pictures and contact your place of purchase immediately.
GENERAL SAFETY WARNINGS Always wear a helmet and protective safety equipment. Wear closed shoes without heels and ensure your laces are tied. Do not ride with more than one rider or exceed the weight limit of 120kg/265lbs in any other way. ...
The LED on the charger will turn red while charging and turn green when the scooter is ready for use. Remove the charger and cover the plug. Charging time with the included 2A charger is ca. 7-9 hours for the Mantis 17.5 Ah version, and 10-12 hours for the Mantis PRO 24.5Ah version.
Battery Disposal Do not dispose of your battery by way of landfilling, incineration or household trash. We recommend disposing through a local recycling program suitable for lithium-ion batteries. Contact your local waste management service for more information. Mishandling of used batteries may do tremendous harm to the environment.
Page 10
Do not charge your scooter if the charging port on the scooter is damaged or wet. Do not charge if there is excessive heat, odor or leakage coming from the battery or it looks abnormal in any way. If the battery leaks and you accidentally get in touch with the liquid, rinse thoroughly with water and then seek medical care.
OPERATIONS Assembling the Mantis Carefully open the box and take the scooter out with both hands. Do not pull the steering bar out by itself as it is attached to the rest via the cablework. Also pay attention not to lose the metal plaque with the fluid logo which you will need to screw on to secure the steering bar to the scooter.
Folding your Scooter 1. Loosen the quick release buckles and slide locking ring upwards. 2. Fold handle post downwards until it touches the scooter’s deck and attach it to the hook in the rear of the board. This will lock the handle post in folded position and enable you to carry your scooter with one hand while folded.
Braking Correctly The Mantis scooter has dual front and rear disc brakes. For braking, use the rear brake first for decelerating (the left braking lever on the handle bar) before engaging the front brake (the right lever) to come to a full stop.
TURBO mode and DUAL motor drive. Display Settings – Mantis 17.5Ah The Mantis scooter is equipped with the following display: Gear change. To change the gear (1=slow, 2=medium, 3=fast), while the scooter is powered ON, press the POWER button to enter gear setting mode.
Page 15
And-Go is ON), i.e. the accelerator only works if the scooter is already in motion. 5. Mode Button. Press to select various display options: MODE COMMENT TIME Time since powering on the scooter. TRIP Distance travelled since powering on the scooter. Total distance travelled.
Cruise Control if necessary. Display Settings – Mantis PRO 24.5Ah The Mantis PRO scooter is equipped with the following LCD display: 1. Speedometer. Shows the speed at which you are travelling. 2. Battery Indicator. Charge your scooter frequently, do not let it run out of battery.
Page 17
7. Mode Button. Press to select various display options: MODE COMMENT TIME Time since powering on the scooter. Distance travelled since powering on the scooter. TRIP Total distance travelled. Current voltage. Number of times battery has been charged (inaccurate as only full discharges are counted) Detailed P-settings mode.
Page 18
Cruise Control. Cruise control allows you to maintain your driving speed automatically without continuing to hold down the accelerator. In order to enter Cruise Control, activate it first in the P-settings [P6]. While driving, keep the accelerator steady for 3-5 seconds until Cruise Control kicks in and scooter travels at constant speed without driver holding down the accelerator.
SCOOTER MAINTENANCE & TRANSPORT Never perform maintenance on this product while the unit is powered on or charging. Always power off before performing maintenance. Do not attempt to perform repairs or modify the scooter but contact your place of purchase or refer to a professional repair facility. ...
DECLARATION OF CONFORMITY This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Mantis and is the answer not in the manual?
Questions and answers
Снятие заднего крыла и стоп сигнала