Page 2
It feels better in here already. We started Windmill to help you feel more comfortable at home. We hope your new AC keeps you living breezy for many years to come! Thanks for choosing Windmill, Mike & Team...
Get to know your AC Unit overview.................. Labels & important information......... Controls overview................ Display & operating overview..........Important things to highlight..........Remote control................Cleaning & maintenance How to clean & change your filter........How to clean & store your AC..........Environmental impact............Warranty..................
Let’s chat safety. The Windmill AC is a large home appliance with many A couple of important symbols to know: moving parts. As you can imagine, there are a lot of important safety instructions that will help keep you, (you’ll see them throughout this guide) others, your home, and your AC safe.
● Keep all packaging materials away from children. These materials can be a choking or suffocation hazard to children. ● Store and install your AC unit where it will not be exposed to temperatures below freezing or exposed to dangerous, non-normal outdoor conditions (like high temperatures or excessive dust and pollution).
● Use a dedicated circuit. THE RISK OF PROPERTY DAMAGE, SERIOUS ● Do not start or stop the AC by using the power cord. It is not meant to be INJURY, OR DEATH. an ON/OFF switch. Use the power button on the unit, app, or remote.
Keep this manual for future use. ● Do not drink the water that is produced by the unit during normal ● If you notice anything abnormal or broken as it relates to your AC (weird operation. ● Avoid using a heat-generating appliance (e.g. dryer) while you’re using smell, smoke, missing parts, etc.), unplug your unit immediately and...
Refrigerant. Important safety instructions For R32 Only WARNING ● Servicing shall only be performed as recommended by the equipment RISK OF FIRE OR EXPLOSION. This unit contains a manufacturer. Maintenance and repair requiring the assistance of other newer refrigerant called R32 that has a lower Global skilled personnel shall be carried out under the supervision of the person competent in the use of flammable refrigerants.
FCC statement. Federal Communications Commission (FCC) Host device labeling: Interference Statement This device includes the following module. Contains FCC ID: 2ANDL-WR2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are RF exposure statement designed to provide reasonable protection against harmful interference in a residential environment.
Get to know your AC. AC unit overview Exterior Metal Housing Display Control Panel Front Air Vents Rear Condenser Rear Bezel Front Intake Grille Front Bezel Vents (The filter is behind this)
Get to know your AC. Labels & important information Behind front grille Top view Nameplate & product Info Model # & Serial # Moving, hot parts, Top bar Safety information CAUTION 1. Remove front intake grille by gently pulling the 3.
Use this to change the mode to cool, eco, or fan. Power indicator light Fan button Shows the AC is powered on (you can shut this Use this to change the fan speed to high (3), light off by holding down Mode for 5 seconds).
Get to know your AC. Display & operating overview Temperature display Cool mode This area will display the room temperature. This mode helps keep your home cool, comfortable, When you adjust the temperature up or down and dehumidified. In this mode, you can choose using the temperature button, this area will then any fan speed (low, medium, high, auto).
Page 14
Other important operating notes: with the app. ● There is a 3 minute delayed start if the AC is turned on and off quickly in cool or eco mode. This helps protect the compressor from overheating or the circuit breaker from tripping. The fan Degree symbol &...
Press any button to reactivate the display. right away (since it’s already below your target temp!). For NOTE: If you want your AC to run completely in the dark, you can shut off example, if your room is 68 degrees and your unit is set to the indicator light by holding down the “mode”...
Use a new CR2032 3 Volt Lithium Coin Cell Battery. The remote control is intended to work up to 25 feet away from the AC unit. It will not work reliably from further distances or if there are objects in between the remote and AC.
For cleaner, fresher air, we also included (for free!) a removable WARNING activated carbon filter, which helps remove odors, smoke, and ● Power off and unplug the AC before you change the filter. VOCs (volatile organic compounds) from the air. To learn more and subscribe, visit windmillair.com.
Do not store if the unit is damaged. Fix the unit before ● storing. WARNING ● Turn off and unplug the AC before you clean it. Do not clean the inside of the AC unit. Only authorized personnel can clean the interior of the product.
Windmill AC, on the inside and outside of your windows) during the sunniest parts of the day. home. 3. Give your AC some shade: Your unit will be happier and work more efficiently if you place it in a window that doesn’t get a lot of sun.
Note: You’ll need to have your model number and serial number handy before registering your AC. Both numbers can be found by removing the front intake grille. They will be on a white sticker attached to the inside of the front bezel.
Page 21
We’re here if you need us. We mean it. If you have any questions or need additional help, Go to windmillair.com/support Email us at support@windmillair.com...
Need help?
Do you have a question about the AC and is the answer not in the manual?
Questions and answers
How can I get rid of a slight high vibrating noise when compressor is on.
Sensory board is going crazy. How do you reset it?
I saw the red circle on the panel- and rinsed the filter and etc- but after replacing the red light is still showing... Shouldn't it go off?
Unit not blowing cool air. 1 year old.
How can I turn off the beep when changing modes or temperatures?