Advertisement
Step 19
Place the GPS MicroSD card in the "Nav" slot on the front of
the dash panel. Test GPS functionality (GPS MicroSD card
must be in the unit for the navigation to work).
"MMC" Can be used to load audio to the unit using a
di erent MicroSD card (not supplied).
Without Shaker Audio
(Not Ampli ed)
Not Used
Connect to Factory
Wiring Harness
Harness Notes:
Cars with factory ampli ers may require the use of the ampli er integration harness, this will provide a lower level output from the Navos to match the
factory amp. Not all cars will require this harness.
If the speaker output level is very high use the ampli er integration harness. If the audio output is very low, remove the amp integration harness and plug
the main harness directly into the Navos.
Additionally there is a "Factory Ampli er" setting in the sound menu that can be used to ne tune the output level of the head unit to any given installation.
Step 20
Re-install the Navigation/dash panel by neatly tucking the
wires behind the navigation unit. ** Note: There is a notch in
the bottom right side of the dash panel to allow the AUX
adapter harness to pass through without getting pinched.
Vehicle Wiring Con gurations Depending on Factory Options
AMP/SWC
Required
Main Harness
Plug
Step 21
Finish the install by pressing in the appropriate dash panel
ller plugs. If your car came factory equipped with heated
seats, use the heat seater plugs. If you do not have factory
heated seats install the blank plugs. Enjoy.
With Shaker Audio
(Ampli ed)
Ampli er Output
Harness
Shaker Ampli er
Integration Harness
Main Harness
Connect to Factory
Wiring Harness
Sku: 407632
AMP/SWC
Required
Plug
User Instructions
Advertisement
