Advertisement
Step 7
(Dual Climate Control Only)
To retain the "Auto" Fan speed control, remove the (2) T20
screws securing temperature sensor to the factory dash
panel. Relocate the sensor to the passenger side foot well.
There is space where the dash meets the carpet.
Step 10
(Sync Vehicles Only)
Locate the USB connector on the Sync Module.
Step 8
Unplug the factory AUX connector from the center console.
Plug in the factory integrated AUX cable for the Navos unit.
The red and white RCA cables will connect to inputs cable for
the navigation unit.
Step 11
(Sync Vehicles Only)
Remove the USB cable from the Sync module.
Step 9
(Sync Vehicles Only)
Access the factory Sync module by lowering the glove box.
Open the glove box and apply rm pressure to either side
while gently pulling it down.
Factory Sync USB
Sync Adapter to
Navos
Step 12
(Sync Vehicles Only)
Connect the Navos Sync Adapter to the Factory Sync USB.
Route the Navos cable to the opening in the dash board. This
Adapter cable will be connected to the USB labeled "Media"
coming o the back of the navigation unit. The factory Sync
module will no longer have a USB cable connected to it.
Close the glove box.
User Instructions
Sku: 407632
Advertisement
