Page 1
Wi-Fi IP CAMERA QUICK OPERATION GUIDE Apply for Model: BC5 /P1-4X /P14-4X/ P2R-20X Note: Due to the continuous updating of the product and software, there may be a discrepancy between the operating guide and the APP interface. All the instructions are subject to the actual operation...
1. Introduction Thanks for buying JideTech Wi-Fi IP Camera. We provide IP cameras which has different appearance and function. We follow the people-oriented design philosophy, these four cameras will be easily able to integrate into our daily lives, both in terms of appearance and function.
5. Mobile APP Connection 5.1 Connect Hot-Spot Connect power supply and use your mobile device to search the camera’s Hot-Spot and connect the Hot-Spot. As the below picture. The camera will turn into the self-test mode after connect power supply. It will take about 15 seconds. 5.2 Add Camera Add your camera to ‘CamHipro’...
5.4 Connect the Camera by Scan QR Code A) Connect the camera to the power supply and the camera would turn into self-test mode, which would take about 15 seconds. Open the ‘CamHipro’ APP. B) Add the camera by Scan QR code follow the below steps. Note: Please make sure that the camera has connected to your router’s Wi-Fi.
5.5 Connect the Camera by Search Nearby Devices Connect the camera to the power supply and the camera would turn into self-test mode, which A) would take about 15 seconds. Open the ‘CamHipro’ APP. B) Add the camera by Search Nearby Devices follow the below steps. Note: Please make sure that the camera has been connected to router’s Wi-Fi.
5.6.2 Local files, device list and add other new camera Click to view the local file of different cameras.; click to change the camera device list;click to add a new camera. 5.6.3 Pre-set point and auto cruise (For PTZ) Click the camera into real-time monitor -- turn to next page -- preset position Number 1-8 means 8 points you want to set up Adjust the camera rotation to the first point you want to monitor on the app;...
Cruise line Number for setting Number for auto cruise Number for stop the second cruise line 17-32 42 +transfer 42+ Setting the third cruise line 65-80 43 +transfer 43 + Setting the forth cruise line 113-128 44 +transfer 44 + Setting the fifth cruise line 129-144 45 +transfer...
6. Computer Browsing Access 6.1 Search IP Camera Download Software from the website ( https://JideTech-cctv.com) or Mini CD in the package, open the file and install search tool in your computer. Click “next” to find IP camera. You can select Network Card to search IP Camera.
Local manual recording. Video Recording playback: Click the playback, select the date and time, select the local playback or SD card playback, search the video files and double click on the file to play. PTZ control operation interface, control the camera to rotate horizontally and vertically.
Video: Set the video format, video coding, resolution, bit rate, max frame rate, key frame interval, bit rate control and image quality. OSD Set: Set time stamp, time show, camera name and name show in this interface. Image: Adjust the brightness, saturation, contrast, exposure parameter and set the WDR, Aemode, Imgmode, Intelligent night mode, IR LED Control, IRCut in this interface.
6.4.3 SettingAlarm Audio alarm: Enable this function. Need to connect a buzzer, turn on & adjust the volume, audio alarm can work well. Motion detection: There are 4 windows selections under Motion Detection. Select different windows to display different window positions. Drag the selected window to enlarge the window proportion.
Timed record: Set the Record files duration, whether to open Record and stream. Email Setting: FTP Setting: Terminal: Set the cruise laps, select the centred while self-check on/off, close the alarm PTZ movement on/off and indicator display mode. 485Set: These cameras can’t support RS485. Multiple setting: In the same LAN, two or more of this series products from our company's, can be displayed on the same page via this Multiple Setting.
7. Video Management Software (P2P Client) Using Video Management software to view multiple cameras at the same time 7.1 Software installation Download from the website ( https://JideTech-cctv.com ) or Mini CD in the Package. Install it on your computer. 7.2 Add Camera A)...
Page 23
B) Click to Set an Area name (Like: office / home / factory……), you also can modify and delete Area as picture showing below. C) Click “Search” to find IP Camera in the LAN, Select the camera click “add” to Add camera. - 21 -...
Page 24
D) Double Click camera’s UID to modify camera’s password. E) Click Back to preview screen, Double-click the camera name in the device list to preview the screen in real time. - 22 -...
Frequently Asked Questions Q1: Remote viewing, appear pause and delay phenomenon? A:1) Related to network data, it is recommended to adjust the HD mode to Smooth mode when watching, and the video file is still saved in HD mode. 2) Try to reduce the camera stream when view the video, reducing the stream may affect the quality of the image. 3) Remote viewing, the network recommends uploading network data up to 512KB/S.
Page 26
A: rtsp://192.168.1.100:554/11 Q11: WBE browsing plug-in installation problem A: Web page online download plug-in component: ActiveX, Or install the plug-in program in the CD! Q12: Third party software: iSpy Software operation A: iSpy Add camera selection: Open the software click add object, Select the IP photographer, Click ONVIF to enter the user name and password.
If you have any other questions, please visit the official website of our company or consult the customer service email address. Company Name: ShenZhen JideTech Development Co., Limited Company Address: 9F Niulanqian Building Minzhi Avenue, Minzhi Street, Long Hua District, Shenzhen Guangdong, China, 518109 Website: www.jidetech-cctv.com...