Partial Air Extraction At The Spindle End - Deprag GDS027-320BY Operating Instruction Booklet

5.1. Partial air extraction at the spindle end

NOTE
Turn adjusting ring 315158 to the following position (see picture
Position of adjusting ring 315158 with exhaust air), in order to
use the exhaust air for blowing away abraded particles.
The adjusting ring has to be in line with the spanner flat of the
spindle bearing 3149412.
A part of the exhaust air will now vent through the spindle end of
the grinder.
adjusting ring
315158
Picture: Position of adjusting ring w i t h exhaust air
Picture: Position of adjusting ring w i t h o u t exhaust air
spanner flat of spindle
bearing 3149412
14