Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference; Rotary Hammer Safety Warnings - Makita HR2800 Instruction Manual

ENGLISH (Original instructions)
1. Switch trigger
2. Lamp
3. Reversing switch lever
4. Quick change chuck for SDS-plus
5. Change cover line
6. Change cover
7. Spindle
8. Quick change drill chuck

SPECIFICATIONS

Concrete
Capacities
No load speed (min
Blows per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to EPTA-
Procedure 01/2014, are shown in the table.
For Model HR2800
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
For Model HR2810, HR2810T, HR2811F, HR2811FT
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work. It
is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
Explanation of general view
9. Action mode changing knob
10. Grip base
11. Side grip
12. Teeth
13. Protrusion
14. Bit shank
15. Bit grease
16. Bit
Model
Tungsten-carbide tipped bit
Core bit
Diamond core bit (dry type)
Steel
Wood
-1
)
Overall length
Net weight
Safety class
HR2800/
HR2810
314 mm
3.4 - 3.8 kg
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
ENE042-1
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
ENE043-1
(cordless) power tool.
ROTARY HAMMER SAFETY
WARNINGS
ENF002-2
Safety instructions for all operations
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a "live" wire
GEA010-2
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
17. Chuck cover
18. Depth gauge
19. Dust cup
20. Blow-out bulb
21. Chuck adapter
22. Keyless drill chuck
23. Sleeve
24. Ring
HR2810T HR2811F
28 mm
80 mm
80 mm
13 mm
32 mm
0 - 1,100
0 - 4,500
339 mm 320 mm
3.5 - 3.8 kg 3.5 - 3.9 kg
/II
HR2811FT
345 mm
3.6 - 3.9 kg
GEB243-1
5