amber connect Amber Swift C200 Quick Start Manual
  1. Manuals
  2. Brands
  3. amber connect Manuals
  4. Receiver
  5. Amber Swift C200
  6. Quick start manual

amber connect Amber Swift C200 Quick Start Manual

Versatile assets gnss tracker
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Amber Swift C200 and is the answer not in the manual?

Questions and answers

Related Manuals for amber connect Amber Swift C200

Summary of Contents for amber connect Amber Swift C200

  • Page 2: Main Features

    1. Overview 1.1 Main Features ● GPS + LBS + WIFI Positioning ● IP67 dust and waterproof (Device waterproof performance will be weakened if the SIM is inserted by customers.) ● Tamper alert ● 6000mAh battery ● Strong magnet installation ●...

  • Page 3: Led Indications

    3 Accessories Device Magnetic cover User guide Charger Charge Cable Collar Optional 4 LED indications Power (Red) Status Meaning Flicker quickly (every 0.3 seconds) Battery low Flicker slowly (1s on; 3s off) Fully charged Flicker slowly (0.1s on; 3s off) Device works normally Always ON Charging...

  • Page 4: Operation And Functions

    GPS (Blue) Status Meaning Flicker quickly (every 0.3 seconds) Searching GPS Flicker slowly (0.1s on; 3s off) GPS is positioning GPS is normal GSM (Green) Status Meaning Flicker quickly (every 0.3 seconds) GSM initialization Flicker slowly (1s on; 3s off) GSM signal is normal Flicker slowly (0.1s on;...
  • Page 5 Note: 1. Press the ON/OFF button and the LED will flicker for 15 seconds if the device power on successfully. 2. Press the ON/OFF button and nothing will happen if the device power off successfully 6.2 SOS Number (1) Add SOS Number SMS Command: SOS, A, number1, number2, number3# (A means add number.)
  • Page 6 SOS# You can set an SOS number via platform after the device is activated. 6.3 Working mode setting (1) Positioning in a regular time interval SMS command: MODE,1,t# T is the GPS working time interval, range:0/5-7200 minutes. Default: 30 minutes sensor will be invalid in this mode.
  • Page 7 A=ON/OFF; Default: ON M=0~3; alarm way, 0: GPRS, 1: SMS+GPRS; M=2 GPRS+SMS+phone call; M=3 GPRS+Phone call. Default: 1; 6.6 Voice monitoring When SOS number sends monitor command: MONITOR# to the device, the device will reply “OK” and call the SOS number. After the call connected, the terminal will enter monitor condition.

  • Page 8: Troubleshooting

    7.4 Troubleshooting If you are having trouble with your device, try these troubleshooting procedures before contacting the service professional. Problem Causes Solution The signal waves are unable to transmit when using the GPS tracker in Using the GPS tracker in Poor signal the places that have poor signal the places that have good...

This manual is also suitable for:

Asc200

Table of Contents