OVERHEATING AND SAFETY SHUT-OFF
If there is no liquid in the jug, or no jug on the power base, a safety shut-off will automatically
disconnect the power supply should the heating plate overheat. This safety mechanism can
protect the milk frother from being damaged by overheating.
Always remove the jug from the power base before you begin to clean it. Do not immerse
the power base in water or in a dishwasher. Allow the appliance to cool thoroughly before
cleaning, putting in or taking off parts.
•
Lid:
The lid is dishwasher safe. Wash it with warm soapy water or in the top rack of the
dishwasher.
•
Milk jug:
Rinse and clean the jug with warm soapy water and a non-abrasive cloth or place
it in the top rack of the dishwasher. Wipe dry with a soft cloth.
•
Power base:
Use a soft and damp cloth or non-abrasive sponge to wipe it clean. Dry with
a clean cloth. NEVER immerse it into liquid or clean in the dishwasher.
•
Frothing whisks:
NOTE: Never use any sharp or hard cleaning agents to clean the heating plate for it may
cause scratching.
•
Remove the frothing whisk from the jug and wash it with running wate
•
Pour enough water into the jug and use a soft cloth or brush to clean it.
•
DO NOT ush the power base directly with water or any other liquid.
•
DO NOT immerse the power base into the water or any other liquid.
•
Please store the frothing whisk in the base when not in use.
Copyright 2018-2022 Secura, Inc. All rights reserved.
AUTOMATIC MILK FROTHER AND HOT CHOCOLATE MAKER
CLEANING AND MAINTENANCE
Remove the frothing whisk from the jug and wash it in warm soapy water.
Be sure to dry thoroughly before storage.
r.
www.thesecura.com
7