Maxcom KXT709 Manual page 7

 Adjusting LCD Contrast
1. After setting up the local area code, press SET key, LCD displays LCD 08
2. Press UP/+ or DOWN/– key to adjust the LCD contrast, total 16 levels can be selected.
3. Press SET key to confirm and exit.
At on-hook state, press FLASH/÷ key to enter LCD contrast setting directly, then press
FLASH/÷ key continuously to adjust the LCD contrast.
 Setting Alarm Clock
1. In on-hook state, press ALARM/P key once, LCD displays 12-00 AL1,
2. Press UP/+ or DOWN/– key to select ON or OFF. LCD displays "ALM" icon when the alarm
is set to ON.
3. Press SET key, value "12" starts to flash.
4. Press UP/+ or DOWN/– key to set the alarm hour and press SET key to confirm and enter
alarm minute setting.
5. Press UP/+ or DOWN/– key to edit alarm minute and press SET key to confirm and go to
next group alarm clock setting.
6. Repeat the above steps to set additional alarms.
NOTE: The first 3 groups alarm clock will be repeated periodically every day while the last 2
groups alarm clock is effected one time.
SECRET CODE SETTING AND REMOTE MONITOR FUNCTION
 Setting
1. In on-hook state, press and hold RING key for 3 seconds, LCD displays Pin ----.
2. Input a 4-digit of PIN using the numeric keys.
3. Press DEL to edit the secret code, press SET to confirm.
4. When the last digit of the secret code is #, the telephone will activate remote monitor
function.
5. Set the ringer to OFF. (Please refer to section "SETTING RINGING TONE").
 Usage
1. Secret code: When caller calls this telephone, he/she will hear the usual ringing tone (when
the line gets through) three times or four times. However, the telephone unit will not ring. The
caller will hear a short "di" sound, which means that the caller need to key in the secret code.
Once the caller keys in the correct code, the telephone unit will ring. Press
the handset to have the conversation with the caller.
2. Remote monitor: If the last digit of the secret code is #, after the caller keys in the correct
secret code, the telephone unit will go into hands free mode automatically.
3. If the caller keys in the wrong code, he/she will have to call again and key in the correct
secret code PIN.
NOTE: This function is useful only when the telephone ringer is set to OFF. The caller must
7
key or pick up