OPERATING INSTRUCTIONS
Remote Control
• The patio heater comes with a button cell CR2450 battery
provided in the same plastic wallet as the instruction manual.
• To use the remote for the first time, remove the battery cover
at the back of the remote, and insert the battery with the
positive side facing up, and replace the battery cover.
Low
Button
• Push the On/Off switch to the "I" position to activate the
heater before using the remote.
• Press the LOW button to operate the heater on 1000W. Press
the LOW button again to turn it off.
• Press the HIGH button to operate the heater on 1500W. Press
the HIGH button again to turn it off.
• Press both the LOW and HIGH buttons to operate the heater
on 2500W. Press both the LOW and HIGH buttons again to
turn off the heater.
• To turn the LED light on, press the "Light" button on the
remote control. Press again to turn off.
Replacing the Battery
• To replace the battery follow the steps below:
1. Remove the battery cover at the back of the remote.
2. Use a flathead screwdriver to lift the battery up and out
of the remote.
3. Replace the button cell CR2450 battery and then
reinstall the battery cover onto the remote.
Light Button
16
High
Button
Revision 1.2