Page 1
OWNER’S MANUAL Read and understand this entire manual before allowing child to use this product! For assistance contact Razor. DO NOT RETURN TO STORE. NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not reflect exact appearance of actual product.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
Kart was partially assembled and packed at the factory, there should not be any problems, even if the box has a few PRODUCT. The Hovertrax Kart scars or dents. has been built to certain Razor design specifications. The original Estimated Set-Up Time equipment supplied at the time of Allow up to 10 minutes for assembly.
ASSEMBLY AND SET UP Frame Assembly Slide the front frame into the rear frame as shown. Adjust to preferred length, and then tighten the adjustment knob to lock into place. Adjustment knob is included in plastic bag. Hand Lever Assembly Required Tool: 6 mm Allen wrench (included) Insert the left and right hand levers on to the frame Using washers and button head screws included in...
Page 6
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
Page 7
Kart and Hovertrax and similar products are screws on the left and right hand lever brackets, so that upside down. the Hovertrax Kart is securely attached to the Hovertrax and similar products (not included). Hook straps onto the back of the hand lever brackets.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
TERRAIN AND AVOIDING HAZARDS, SLIPS AND TRIPS The Hovertrax Kart is intended for indoors or use on smooth, flat surfaces. However, to prevent loss of traction, you must always be careful when riding and learn to identify and avoid slippery and wet surfaces, loose materials, slopes, potholes and other obstacles.
Keep your product working for years with genuine Razor parts. Visit our website or e-mail us for more information on spare part availability. (Specifications subject to change without notice.) 1. Left Hand Lever 2. Right Hand Lever 4. Seat Support Bracket 7.
Page 11
NOTICE: INSURANCE YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.
Need help?
Do you have a question about the HOVERTRAX KART and is the answer not in the manual?
Questions and answers
Hover board not lasting when kart attached