Download Print this page

Razor Crazy Cart Helpful Tips

Hide thumbs Also See for Crazy Cart:

CRAZY CART HELPFUL TIPS

No Light(s) on the unit

Check fuse

Check for object(s)/Debris caught in front wheel

Check underneath frame for any damage to the foot

pedal (throttle) and/or wires

The longevity of the rear wheels will vary depending on

the riders weight; type of surface unit is ridden on

Note

and/or how the unit is ridden

Loosen the 4 Phillip screws on the left side of the

motor cover and remove cover. Loosen the 3 Phillip

screws on the chain guard and remove chain guard to

gain access to the chain tensioner and chain.

Check the nut that attaches the chain tensioner to the

front fork to see if nut is too tight

Nut

10mm wrench

If nut is too tight, loosen nut approx. 1/2 a turn

If nut is already loose -

Replace Chain Tensioner

Page 1 of 3

12.19.13

Table of Contents

Do you have a question about the Crazy Cart and is the answer not in the manual?

Page 1 CRAZY CART HELPFUL TIPS No Light(s) on the unit Check fuse Check for object(s)/Debris caught in front wheel Clicking Noise Check underneath frame for any damage to the foot pedal (throttle) and/or wires The longevity of the rear wheels will vary depending on the riders weight;...
Page 2 CRAZY CART HELPFUL TIPS Gently press down on the bottom of the foot pedal (throttle) If unit won't start after releasing the foot pedal (throttle) Make sure safety button is in the "ON" position Check underneath frame for any damage to the foot...
Page 3 CRAZY CART HELPFUL TIPS Unit Vibrates and/or Front Wheel Grip the steering wheel tightly and lift the Drift Bar Wobbles completely up to re-align the front wheel The casters wheels in the front of the unit are necessary for stability and balancing of the unit. It will...