Page 2
VW010 Issue 02 PLEASE BE ADVISED: Before assembling the Valley-Walk for the first time, it is highly recommended that Installers familiarise themselves with the component parts and carry out a test assembly and disassembly in a safe area away from the point of final installation. All component parts detailed in the operating instructions must be used in the assembly of the system.
Page 3
VW010 Issue 02 Step 7 Step 8 FIG 1. Attaching the pin FIG 2. Opposite side. Slide the bottom end rail sockets over the main frame rails and Swing the top rail into position and lock the clamp onto the rail. attach the supplied pin and ‘R’...