Related Manuals for Fn-Link FN-8126EU Series
Summary of Contents for Fn-Link FN-8126EU Series
- Page 1 FN-LINK TECHNOLOGY LIMITED FN-8126EU series user 's manual http://www.fn‐link.com Page 1 /6 8/28/2014 ...
- Page 2 FN-LINK TECHNOLOGY LIMITED Index How to install the driver Put the product plug into the USB port of PC……………………..3 Copy the driver into the PC……………..………….…....3 Install the driver……….……………………………..…....4 Install driver successfully………...…...........4 connect to external wireless network………………......6 http://www.fn‐link.com Page 2 /6 8/28/2014 ...
- Page 3 FN-LINK TECHNOLOGY LIMITED 1. Put the product plug into the USB port, the "device manager" of PC is shown below: 2. Copy corresponding driver "RTLWlanU_WindowsDriver_1019.0.0518.2012_ UI_1.00.0191_EU" into the PC, and install driver, the installation methods: open the file "RTLWlanU_WindowsDriver_1019.0.0518.2012_UI_1.00.0191_EU",...
- Page 4 FN-LINK TECHNOLOGY LIMITED 3. After install driver successfully. the "device manager" of PC is shown below: http://www.fn‐link.com Page 4 /6 8/28/2014 ...
- Page 5 FN-LINK TECHNOLOGY LIMITED The USB icon and wireless network adapter displaying in the lower right of the screen. Shown as below: http://www.fn‐link.com Page 5 /6 8/28/2014 ...
- Page 6 FN-LINK TECHNOLOGY LIMITED 4. The default settings is "station mode", we can connect to external wireless network. (i.e. it is regarded as a wireless adapter) http://www.fn‐link.com Page 6 /6 8/28/2014 ...
- Page 7 FCC Statement: The final end product must be labeled in a visible area with the following "Contains TX FCC ID:2AATLFN-8126EU". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 stayement is required to be availale in the users manual: This device complies with part 15 of the FCC Rules.