Advertisement
Technical specifications
Model 2016 – BYT-1
True Bypass
Input impedance: 750Kohm
Power Input: DC 9v center negative (minimum 100mA)
Consumption: Regulated DC 9v center negative
Dimensions: 12 cm x 9.4 cm x 5.4 cm
Weight: 475gr
Use and care of the pedal
• Use only regulated 9v dc adapter, with negative center polarity. In no way should be
connected to 220V or adapters of other kinds.
• Avoid dropping, hitting or exposing the pedal to extremes of humidity or temperature.
• To clean the pedal, use a dry cloth.
• Do not remove the protective silicone legs, they protect the pedal from shocks and
external pressures.
Problems and solutions
• The LED lights up but there is only sound when the effect is in bypass:
Make sure the instrument is properly connected to the INPUT jack, and the amplifier
to the OUTPUT jack.
• The indicator LED doesn't light up:
The pedal is not connected to an appropiate DC adapter.
• The indicator LED doesn't light up, and when connecting the pedal, the power sup-
ply/other pedals turn off:
Check that the DC plug doesn't have metalic parts that may touch the case of the
pedal.
• The effect is too weak, or the sound is unduly saturated:
Use an appropriate DC adapter. If the pedal is connected in a loop, check its send
and return levels.
• The pedal makes a low pitched hum:
Feed the pedal with a regulated dc adapter of sufficient amperage
• The sound cuts out intermittently:
Check the condition of the input and output cables.
Advertisement
