Related Manuals for lifelong Falcon 27.5 T
Summary of Contents for lifelong Falcon 27.5 T
- Page 1 6 MONTHS WARRANTY Falcon 27.5 T Manufactured for & Marketed by : Lifelong Online Retail Private Limited For queries and complaints: please contact: customercare@lifelongindia.com www.lifelongindiaonline.com...
- Page 2 Lifelong family. PRODUCT STRUCTURE: At Lifelong, we take pride in developing quality products for your home, health and happiness. Through constant innovation in our products, we have been able to develop a wide spectrum of products across Home, Kitchen, Grooming and Wellness categories.
- Page 3 3. Brakes are operating effectively. SECURITY PRECAUTIONS AND WARNING 4. Steering is free with no excessive play. 5. Wheels run true and hub bearings are correctly adjusted. OWNER’S RESPONSIBILITY AND IMPORTANT POINTS: 6. Wheels are properly secured and locked to frame/fork. 7.
- Page 4 5. Always keep both your hands on the handle bars and your feet on the pedals and also CAUTION: NIGHT RIDING sit correctly on the seat at all times. 6. Wear a protective cycling helmet and make sure no loose clothes can catch in your If you intend to ride on public roads, especially in the dark hours you should ensure wheels or chain.
- Page 5 Suspension Suspension Speed Single Speed bicycle. This can prevent accidentally discarding parts of the bicycle. Packing List Name Units Lifelong Falcon 27.5T Bike 9 mm Assembly Kit (85% Pre-Assembled) 12 mm Assembly Kit List 15 mm 10 mm 9 mm...
- Page 6 HANDLEBAR AND STEM INSTALLATION WARNING: To prevent steering system damage and possible loss of control, the “MIN-IN” (minimum insertion) mark (A) on the stem must be below the top of the Locknut (B) (fig 01). NOTE: Remove plastic Cap (E) from the end of the Stem (1) THREADLESS STYLE STEM: NOTE: This procedure applies to both the two-bolt Stem and four-bolt Stem (figs 01b and 01c):...
- Page 7 TESTING STEM AND HANDLEBAR TIGHTNESS To test the tightness of the stem: • Straddle the front wheel between your legs. Try to turn the front wheel by turning the handlebar. • If the handlebar and stem turn without turning the front wheel, realign the stem with the wheel and tighten the stem bolt(s) tighter than before (about 1/2 revolution only at a time).
- Page 8 2. Tighten the Seat Clamp so the seat stays on the seat post. If the Seat Clamp has a nut on each side, tighten both nuts equally. Point the Seat (8) forward and put the Seat Post (9) into the Seat Tube (B) (figs 07, 08). CAUTION: If you accidentally drop the seat post into the seat tube, it may be difficult to remove it.
- Page 9 ROUTINE INSTRUCTIONS AND MAINTENANCE PEDAL INSTALLATION 1. Any modification made to the frame, fork, or any other parts can be very unsafe. Any CAUTION: There is a right pedal marked “R” and a left pedal marked “L”. component which is not approved can put very high stress on your bicycle and can 1.
- Page 10 At Lifelong, we believe in 6. An incorrectly positioned seat post can break the saddle rails or the saddle-clamp providing not only service, but adding value to your purchase.
- Page 11 6. Lifelong total liability for damages relating to or arising accident, negligence or improper handling. out of the purchase or use of the product regardless of d.
Need help?
Do you have a question about the Falcon 27.5 T and is the answer not in the manual?
Questions and answers