The Ultimate Lock™ 3000 Series Installation Guide
Before You Start
a. This lock is designed for a door that opens into the home or office. The lock can be installed on an outward
swinging door, but special instructions are required. Go to the www.theultimatelock.com for details.
b. To provide maximum protection, The Ultimate Lock™ should be installed in a solid 1-3/4" thick wood door or
steel-skinned wood-filled door mounted in a double studded door frame.
c. If your door does not already have a deadbolt installed, it is highly recommended that you purchase an
installation jig kit for deadbolts and door handles. These kits include special hole saws, templates, and other aids
to simplify the installation process. If your door has a metal skin, be sure your kid includes a bi-metal hole saw
A Note About Steel Doors
If your door jamb/frame is steel, do not remove the hinge screws! See step 2. Check www.theultimatelock.com to
get information on installing the striker plate on a steel door frame.
Tools You Will Need
• No. 1 and No. 2 Phillips Screw drivers"
or
No. 1 and No. 2 bits for an electric screwdriver/drill
• Pencil or steel marking pawl
• Electric drill (3/8" chuck) with torque adjustment)
• Drill bits:
1/16"(1.5 mm)
3/32" (2.5 mm)
1/8" (3 mm)
9/64" (3.5 mm)
Limited Warranty
Every Ultimate Lock™ is thoroughly inspected before leaving the factory. It is warranted to be free of defects from workmanship and materials for a period
of TEN YEARS from the date of original purchase. Should any trouble develop during the TEN-year period, return the complete lock system, freight prepaid,
to Ultimate Lock, Inc. at 6150 Richmond Avenue, Suite 209, Houston, TX 77057 or call 1-866-MLS-4005 (1-866-657-4005) for one of Ultimate's Authorized
Service Centers nearest you. If our inspection shows the trouble was caused by defective workmanship or material, Ultimate Lock™ will repair (or at our
option) replace the lock without charge. Register your Serial Number on line at www. theultimatelocksystems/warranty.com This Warranty does not apply where:
• Repairs have been made or attempted by others
• Repairs are required because of normal wear and tear
• The lock has been abused, misused or improperly installed
• Alterations have been made to the lock or its components
In no event shall Ultimate Lock™ be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies
both during and after the term of the warranty. Ultimate Lock™ disclaims liability for any implied warranties, including implied warranties of "merchantability"
and "fitness
for a specific purpose", after the TEN-year term of this warranty. This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state. Some states do not allow the exclusion or the limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
*Disclaimer: The Ultimate Lock is only as strong as your door frame. Please contact your local locksmith to visit your home and evaluate your current setup.
Congratulations on purchasing the finest deadbolt lock
on the market, The Ultimate Lock™. The Ultimate
Lock™ is engineered to be the best deadbolt lock on the
market. It is vital that your lock is installed properly to
provide the maximum protection possible. Read these
instructions completely before you begin the installation.
More information can be found at our website www.
theultimatelock.com.
• Spade bit or forester bit: ¾", and 1"
• Hammer, steel center punch, and 1/2" and 3/4"
chisels
• Small carpenter's square (adjustable)
• Pliers (2 pair)
• Spray lubricant (WD-40, Silicon Spray, or similar)
• Tape measure or 12-inch ruler
• (If no deadbolt installed) Wood or bi-metal hole
saw: 2 1/8" and 1" wood or bi-metal hole saw