Using The Straightener - ICA Home JDL-153 Manual

Product code: JDL-153. Voltage: 100–240 V ~ 50-60 Hz. Power: 55 W.
Important safety instructions. Read them carefully and keep them for future reference.
IMPORTANT SAFETY INFORMATION
• You should only use the accessories or spare parts that have been produced or recommended by
the manufacturer�
• Do not drop the appliance onto a hard surface.
• Children should be supervised to make sure they do not play with the appliance.
DANGER
Risk of electric shock
• If you use this appliance in a bathroom, you need to unplug it after use. Water presents a risk
even when the appliance is switched off. Please note that only authorized people can carry out
electrical installations in a bathroom�
• We recommend installing a Residual Current Device (RCD) not exceeding 30mA for additional
safety. Consult a qualified electrician.

USING THE STRAIGHTENER

STEP 1
For the best results, make sure your hair is dry. Avoid using this straightener on wet hair.
STEP 2
Connect the plug of the straightener into the power supply socket. Switch it on and give it time to
heat up, so it is ready for you to style your hair. Select the temperature you want. If you have thin or
short hair, you should use a lower setting.
STEP 3
Take a section of your hair that measures approximately 5 cm wide and even it out using a brush.
STEP 4
Place this section of hair between the straightening plates and close them. You need to be careful
not to touch the very hot plates or the areas around them� Slide the plates evenly and carefully along
the section of hair� Repeat this process for the next section of your hair�
SPECIFICATIONS:
9