Husky ERZ782478W4 Quick Start Manual

Warranty
GUARANTEED FOREVER. If your Husky tool or storage
unit ever fails bring it back and we will replace it for free.
This full warranty gives you specific rights which vary from
state to state. If this product is defective contact the
manufacturer for repair or replacement parts.
Contents
Description
A: frame
B: beam
C: tie channel
D: wire deck
E: plastic push clip
General Instructions
Assembly of this unit is done by fitting the brackets of the
beams into the slots of the post frames.
A rubber mallet should be used on the ledge of the beams
to properly seat the beam brackets. If a hammer is used
care should be taken to protect the beam surface to avoid
damage by using a protective cloth or block of wood.
The stepped surface of the beam ledge is the top, and
should face upwards. This is the surface that the wire deck
will rest on.
A bracket should engage and fit firmly into the tapered slot
of the post frame. This engagement is a tight swaged fit
and will apply resistance as it fully engages. A visual
inspection should be made to show that the bracket is
properly engaged in the slot.
After assembly re-check each beam for proper
engagement.
4-LEVEL WELDED STEEL STORAGE RACK
77"W x 24"D x 78"H
Quantity Part Number
2 ERF7824BLK
8 ERB72BLKN
12 ER-V4-TB
4 RWD2472SF
16 BBC.118B
Item Number: 458-424
Model Number: ERZ782478W4
Items you might find helpful
Rubber Mallet, Gloves
Components
C: tie channel
A: frame
Safety Instructions
This unit should be placed on a level surface. Failure to
do so can result in poor product performance or create a
possible safety hazard.
This unit should be securely anchored to a wall or floor
with suitable fasteners, which are not included.
Do not use this unit for anything other than the
manufacture's intended purpose.
DO NOT STAND ON ANY PART
OF THE UNIT, OR USE IT AS A
LADDER.
Use care when working with
metal parts. Wear gloves for
protection.
Evenly distribute the weight on each level and always
keep the heavier loads on the bottom.
B: beam
E: plastic
push clip
D: wire deck