Maintenance - Medicura Ardes ARM272 Instructions For Use Manual

Instructions for use
Do not connect the plug into the socket before filling with water.If you want a warm massage, fill the foot
massage bath with luke warm water not more than the maximum water level indicated, if you prefer a refreshing
bath, fill the bath with cold water.
Fill the bath with a carafe.
Moreover the appliance has an infrared function that allows you to get a massage that stimulates the blood flow
and the skin pores opening.
Do not use the dry massager.
Always fill it with water; do not use bath salts or similar products.
Lay the appliance on a flat surface and connect the plug into the socket.
Sit down on a chair and place your feet in.
Plug and switch the selected program.
The foot massage bath is provided with heating element integrated into the bottom part which keeps water
warm.
It automatically starts with heating operation.
POSITIONS OF FUNCTIONING SELECTOR:
0 = OFF
1 = BUBBLES
2 = INFRARED + HEAT
3 = BUBBLES + INFRARED + HEAT

Maintenance

This appliance does not require special maintenance. Clean it regularly.
Before emptying and cleaning the appliance, always un plug the power supply cable.
Remove the plug from the socket before emptying and cleaning the appliance.Tip the appliance to empty it.
Use a soft, damp cloth to clean the appliance.
Clean the attachments using a cloth dampen with alcohol.
Do not use any corrosive products or chemical solvents.
NEVER IMMERSE THE APPLIANCE IN WATER.
6