Maintenance - Medicura m243 Instructions For Use Manual

Massage techniques.
Back: The massager can be used with a vertical movement along the
backbone and shoulder blades and with a circular movement to loosen
particularly tight muscles.
Neck: Move the massager with a vertical movement along the base of the
head and to the sides.
Arms and legs: Massage the muscles with decisive and regular vertical
movements.
General massage: Use circular movements to relax the entire body.
This appliance does not require special maintenance. Clean it regularly.
Before cleaning, make sure the appliance is switched off.
Use a slightly damp cloth to clean the exterior of the appliance, while the
accessories should be rinsed well and left to dry completely before being
put away.
Use a soft, damp cloth to clean the appliance surface.
Do not use abrasive products or chemical solvents.
DO NOT IMMERSE THE APPLIANCE IN WATER.
Installation or replacement of the battery.
Before replacing or removing the battery, make certain that the appliance
has been switched off.
Press the button (A) under the massaging head (Fig.3) to open the
compartment.
Replace the batteries with new ones having the same technical characteristics
indicated on the appliance and make certain they are inserted with the
correct polarity. Close the cover correctly.
If you do not intend to use the appliance for an extended period of time,
remove the battery. If the battery is leaking, be careful not to touch the acid
which has leaked out.
If you come into contact with the acid, wash your hands thoroughly.
Be careful that the acid does not come into contact with the eyes and that
it is not ingested.
Remove the battery from the appliance before its disposal.
The battery must be disposed of in the appropriate containers.

MAINTENANCE

A
FIG.3
>GB
11