Advertisement
5. Egg Whisk
WARNING
●Do not scrape the bowl while the stand mixer is operating.
●The bowl and beater are designed to provide thorough mixing without
frequent scraping. Scraping the bowl once or twice during mixing is usually
sufficient.
●Turn the stand mixer off before scraping.
●The stand mixer may warm up during use. Under heavy load with extended
mixing time, you may not be able to comfortably touch the top of the stand
mixer. This is normal.
TECHNICAL INFORMATION
•
Voltage/frequency : 120VAC~60Hz (550W)
•
Bowl capacity : 5.2 liters
•
KB time: 10 Minutes (Never use this appliance constantly for more than 10
minutes!)
BEFORE FIRST USE
All parts of the stand mixer are to be thoroughly cleaned before being used
for the first time (see section: Cleaning).
Take out the required length of cable from the cable tidy on the base of the
blender and connect the device to the wall outlet.
TRIAL USE
Disengage the locking switch, then lift the machine arm.
Put the mixing bowl onto the base and lock it as the arrowhead notates.
Fix the splash cover onto the mixing blade, then lock the blade into the
machine.
Engage the locking switch, then push the upper cover down and as well as
the arm. Make sure the arm is fixed together with the base, then rotate the
locking switch up to solidly lock the arm.
Plug-in the cord, and turn the switch slowly from speed "1" to speed "8" (try
every speed for a few seconds).
Advertisement
