Charging 充电 - PRESONUS Eris HD10BT Owner's Manual

2.2.2. Charging 充电
Connect the included USB cable to the charging port to charge your
Eris HD10BT headphones using either a standard USB outlet charger
or a computer. The ANC LED will illuminate red while charging. When
the battery is fully charged, the LED will turn off. Once charged, the
Eris HD10BT headphones provide up to 8 hours of Bluetooth playtime
with ANC active, and up to 16 hours ANC off.
将附带的 USB 线连接到充电端口，使用标准的 USB 插座充电器
或电脑，为你的 Eris HD10BT 耳机充电。充电时，ANC LED 灯会
亮起红色。当电池电量充满时，LED 灯将关闭。充电后，Eris
HD10BT 耳机在 ANC 激活的情况下，可提供长达8小时的蓝牙播
放时间，而在 ANC 关闭的情况下，可提供长达16小时的蓝牙播
放时间。
Do not use Bluetooth while charging.
充电时请勿使用蓝牙。
8