Please read the instructions and warnings carefully before use to ensure safe and satisfactory enjoyment of this product. Important safety information Adjust the headphone sound to the proper volume. Loud sound may damage your ears. Don’t turn the volume so high that you can’t hear what’s around you. Use caution or temporarily discontinue use in potentially hazardous situations.
The accessory micro-USB cable must be used for recharging the unit’s battery. Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the headphones, and the USB plug on the other end to a USB port on a computer. When recharging begins, the LED indicator on the headphones will light red.
Redial Last number Standby mode Short press MFB twice quickly Short press “+” button Volume up Conversation mode Short press “ - “ button Volume down Conversation mode Answering calling Ringing Short press MFB button Reject calling Ringing Press and hold MFB button for one second, and release until you hear indication sound...
Page 6
The batteries will not charge Confirm that computer is ON. Confirm that computer is not in power-saving mode. Confirm that accessory micro-USB cable is securely connected to both the wireless headphone and computer. Can’t perform pairing Place the wireless headphones and bluetooth device closely together when performing pairing Can’t perform bluetooth connection Confirm that power is turned on for both wireless headphones and...
Page 7
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 8
ISED Statement ‐ English: This device complies with Industry Canada license ‐ exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.