SAFAVIEH COUTURE SFV4511 Manual

Download this manual

CARE AND MAINTENACE

Always use felt pads under all articles to prevent discoloration or softening of the lacquer.

Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid

common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done

with a soft lint free cotton clot dampened with water or furniture polish. On highly used

surfaces we recommend applying a quality paste wax which should be used on a regular basis

to provide additional protection from scratches and spills. How often you apply the wax

depends on how much wear furniture receives.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this item

This item should be assembled on a soft surface to prevent scratching the finish during assembly

This item may require periodic tightening

PIECE

DESCREPTION

Sofa 2S

Sofa Chaise

Legs

HW1

Spaner

HW2

Hexagon Nut

HW3

Flat Washer M3

HW4

Spilit Lock Washer M3

Part List

PICTURE

Item#SFV4511

Product Dimensions (Inch): 69-3/4"W x33-3/4"D x 28-1/4"H

Weight Capacity

QUANTITY

: 738 LBS

1/2

Page 1 How often you apply the wax depends on how much wear furniture receives. NOTICE Item#SFV4511 Product Dimensions (Inch): 69-3/4"W x33-3/4"D x 28-1/4"H * Please make sure that you have all parts indicated before you begin assembly of this item...
Page 2 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list if any part is missing or damaged. Do not attempt to assemble the product. Estimated Assembly Time: 15 minutes. Carefully place the chair base (A) upside down on a clean and non‐marring surface. Attach the front legs and the back legs in placed at bottom of chair base with HW2 + HW3 + HW4 using HW1. Then place the ...
Page 3 CARE AND MAINTENACE Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills C O U T U R E immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Page 4 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list if any part is missing or damaged. Do not attempt to assemble the product. Estimated Assembly Time: 15 minutes. Carefully place the chair base (A & B) upside down on a clean and non‐marring surface. Attach the legs (C) in placed at bottom of chair base with flat washer(H3)+spring washer(H2)+hexagon nut (H1). Then place the item in standing position and ready to use. ...